This image shows Matthias Kreimeyer

Matthias Kreimeyer

Prof. Dr.-Ing.

Head of Product Development and Engineering Design
Institute for Engineering Design and Industrial Design

Contact

+49 711 685 - 66056/ +49 711 685 - 66083

Pfaffenwaldring 9
70569 Stuttgart
Deutschland
Room: 1.126

  1. 2025

    1. Kreimeyer, M., Stölzle, M., & Dausch, V. (2025). Product Life Cycle. In Product Lifecycle Management. IntechOpen. https://doi.org/10.5772/intechopen.1007497
    2. Bosch, M. J., Nitzlader, M., Bachmann, M., Binz, H., Blandini, L., & Kreimeyer, M. (2025). Integrated fluidic actuators for two-way concrete slabs. Applications in Engineering Science, 21, 100208. https://doi.org/10.1016/j.apples.2025.100208

  2. 2024

    1. Stowe, H. (Mike), Langner, C., Kreimeyer, M., Browning, T. R., Eppinger, S. D., & Yassine, A. A. (2024). DS 134: Proceedings of the 26th International DSM Conference (DSM 2024), Stuttgart, Germany. In DSM: Vol. DS 134: Proceedings of the 26th International DSM Conference (DSM 2024), Stuttgart, Germany. The Design Society. https://doi.org/10.35199/dsm2024
    2. Paliyenko, Y., Langner, C., Müller, B., Dausch, V., Roth, D., Guertler, M., & Kreimeyer, M. (2024). Facilitating the Implementation of Data-Driven Processes in Product Development. In H. (Mike) Stowe, C. Langner, M. Kreimeyer, T. R. Browning, S. D. Eppinger, & A. A. Yassine (Eds.), DS 134: Proceedings of the 26th International DSM Conference (DSM 2024), Stuttgart, Germany (pp. 11–20). https://doi.org/10.35199/dsm2024.02
    3. Nitzlader, M., Bosch, M. J., Binz, H., Kreimeyer, M., & Blandini, L. (2024). Kriterien zur Dimensionierung adaptiver Stahlbetonplatten mit integrierten fluidischen Aktoren. Baustatik – Baupraxis 15. Baustatik – Baupraxis 15, Technische Universität Hamburg. https://www.bb15.baustatik-baupraxis.de/Anmeldung/Upload/PDF/2b964224.pdf
    4. Langner, C., Rehberg, M., Tüzün, G.-J., Roth, D., & Kreimeyer, M. (2024). Herausforderungen des Realbetriebs von autonomen Bussen im ÖPNV entlang des Lebenszyklus (Challenges of the real operation of autonomous buses in public transport along the lifecycle). DS 133: Proceedings of the 35th Symposium Design for X (DFX2024), 005–014. https://doi.org/10.35199/dfx2024.01
    5. Langner, C., Rehberg, M., Roth, D., & Kreimeyer, M. (2024). A Lifecycle Model for Autonomous Buses in Public Transport. DS 134: Proceedings of the 26th International DSM Conference (DSM 2024), Stuttgart, Germany, 127–136. https://doi.org/10.35199/dsm2024.14
    6. Bosch, M. J., Nitzlader, M., Bachmann, M., Binz, H., Blandini, L., & Kreimeyer, M. (2024). Designing a framework for actuators for adaptive structures. Proceedings of the Design Society: International Design Conference - DESIGN 2024, 4, 513–522. https://doi.org/10.1017/pds.2024.54
    7. Stölzle, M. G., Roth, D., & Kreimeyer, M. (2024). Investigation Into the Suitability of Existing Evaluation Methods for Application with Circular Product Architectures in Early Development Phases. DS 130: Proceedings of NordDesign 2024, Reykjavik, Iceland, 12th - 14th August 2024, 1, Article 1. https://doi.org/10.35199/NORDDESIGN2024.47
    8. Langner, C., Paliyenko, Y., Müller, B., Roth, D., Guertler, M. R., & Kreimeyer, M. (2024). Challenges for capturing data within data-driven design processes. Proceedings of the Design Society , Volume 4: DESIGN 2024, 2099–2108. https://doi.org/10.1017/pds.2024.212
    9. Dausch, V., Langner, C., Roth, D., Kreimeyer, M., & Guertler, M. R. (2024). Investigating low data consistency in work planning processes – causes, measures, and opportunities. Proceedings of the Design Society , Volume 4: DESIGN 2024, 225–234. https://doi.org/10.1017/pds.2024.25
    10. Breuning, C., Plogmeyer, M., Pongratz, C., Schott, A., Kreimeyer, M., & Bräuer, G. (2024). Untersuchung des Einsatzpotenzials eines multisensorischen Dünnschichtsystems zur Messung des Fugendrucks in reibschlüssigen Welle-Nabe-Verbindungen. 10. VDI Fachtagung Wellen und Welle-Nabe-Verbindungen, 2443, 179–191. https://www.vdi-nachrichten.com/shop/wellen-und-welle-nabe-verbindungen-2024/
    11. Breuning, C., Hommel, P., Roth, D., & Kreimeyer, M. (2024). Investigation of the Use of Aluminum Foam Sandwich in Battery Housings for Electric Vehicles. DS 130: Proceedings of NordDesign 2024, Reykjavik, Iceland, 12th-14h August 2024, 226–235. https://doi.org/10.35199/NORDDESIGN2024.25
    12. Kreimeyer, M., Roth, D., & Kratzer, M. (2024). Prozessmanagement in der Produktentwicklung. Springer Vieweg, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-45370-0_38-2
    13. Vogel, S., Kreimeyer, M., Richter, R., & Spinler, S. (2024). A Framework for a Persistent Representation of Customer Knowledge to Enhance Product Development. IEEE Transactions on Engineering Management, 71, 9496–9509. https://doi.org/10.1109/TEM.2023.3301821
    14. Tüzün, G.-J., Roth, D., & Kreimeyer, M. (2024). Providing a knowledge-based design catalog as an approach to support the development of design for additive manufacturing skills. Proceedings of the Design Society, 4, 1869–1878. https://doi.org/DOI: 10.1017/pds.2024.189
    15. Nitzlader, M., Bosch, M. J., Dakova, S., Böhm, M., Sawodny, O., Binz, H., Kreimeyer, M., & Blandini, L. (2024). Experimental investigation on adaptive concrete slabs equipped with integrated fluidic actuators. Engineering Structures, 310, 118129. https://doi.org/10.1016/j.engstruct.2024.118129
    16. Kreimeyer, M., Stölzle, M., & Pfletschinger, T. (2024). Zirkuläre Produkte - Eine Frage der Einstellung oder der Alleinstellung. forum Nachhaltig Wirtschaften, 30–32.
    17. Bosch, M. J., Nitzlader, M., Bachmann, M., Binz, H., Blandini, L., & Kreimeyer, M. (2024). Investigation of Pressure Chambers for Integrated Fluidic Actuators in Adaptive Slabs. Actuators, 13(1), Article 1. https://doi.org/10.3390/act13010041

  3. 2023

    1. Stowe, H. (Mike), Browning, T. R., Eppinger, S. D., Trauer, J., Langner, C., Kreimeyer, M., Isaksson, O., Panarotto, M., & Brahma, A. (2023). DS 126: Proceedings of the 25th International DSM Conference (DSM 2023). The Design Society. https://doi.org/10.35199/dsm2023
    2. Fastabend, J., Roth, D., & Kreimeyer, M. (2023). Classification of artificial intelligence applications in product development. In K. Hölzle, M. Kreimeyer, D. Roth, T. Maier, & O. Riedel (Eds.), Stuttgarter Symposium für Produktentwicklung SSP 2023 : Tagungsband zur Konferenz, Stuttgart, 25. Mai 2023 (pp. 103–114). http://dx.doi.org/10.18419/opus-13131
    3. Voigt, M., Roth, D., & Kreimeyer, M. (2023). SYSTEMATIC CLASSIFICATION OF ADAPTIVE FAÇADES – PREPARING A DATABASE. Proceedings of the Design Society, 3, 3295–3304. https://doi.org/10.1017/pds.2023.330
    4. Tüzün, G.-J., Roth, D., & Kreimeyer, M. (2023). Function Integration in Additive Manufacturing: A Review of Approaches. Proceedings of the International Conference on Engineering Design (ICED23), 3, Article 3. https://doi.org/10.1017/pds.2023.201
    5. Saeed, M. S., Falter, J., Dausch, V., Wagner, M., Kreimeyer, M., & Eisenbart, B. (2023). ARTIFICIAL INTELLIGENCE TECHNIQUES FOR IMPROVING CYLINDRICAL SHRINK-FIT SHAFT-HUB COUPLINGS. Proceedings of the International Conference on Engineering Design (ICED23), 3, 645–655. https://doi.org/10.1017/pds.2023.65
    6. Paliyenko, Y., Lukjanenko, D., Tüzün, G.-J., Roth, D., & Kreimeyer, M. (2023). Handlungsfelder deutscher KMUs zur Unterstützung der Entwicklung smarter Product-Service-Systeme. In F. Institut (Ed.), Stuttgarter Symposium für Produktentwicklung SSP 2023: Vol. Tagungsband zur Konferenz Stuttgart, 25. Mai 2023. Fraunhofer IAO.
    7. Nitzlader, M., Bosch, M. J., Binz, H., Kreimeyer, M., & Blandini, L. (2023). Control objectives for adaptive slabs with integrated fluidic actuators, a comparison of effects. Proceedings of the International Association for Shell and Spatial Structures Annual Symposium 2023, 2023(6), Article 6. https://www.ingentaconnect.com/contentone/iass/piass/2023/00002023/00000006/art00023
    8. Hommel, P., Roth, D., Binz, H., & Kreimeyer, M. (2023). Methode zur Bewertung des Einsatzpotenzials von Aluminiumschaum-Sandwich. Stuttgarter Symposium für Produktentwicklung SSP 2023, 199–210. http://s.fhg.de/symposium-ssp
    9. Hommel, P., Roth, D., Binz, H., & Kreimeyer, M. (2023). Implementation of a Design Guideline for Aluminum Foam Sandwich based on Industrial Demands. Proceedings of the Design Society: International Conference on Engineering Design, 2235–2244. https://doi.org/10.1017/pds.2023.224
    10. Dausch, V. C., Roth, D., Kreimeyer, M., & Bohr, S. (2023). CHALLENGES OF USING AUGMENTED REALITY TO SUPPORT AN EFFICIENT AND ERROR-FREE ASSEMBLY IN COMPLEX VARIANT ENVIRONMENTS. Proceedings of the Design Society, 3, 857–866. https://doi.org/10.1017/pds.2023.86
    11. Dausch, V., Roth, D., Kreimeyer, M., & Bohr, S. (2023). Challenges for the implementation of digital transformation in brownfield production systems. Stuttgarter Symposium Für Produktentwicklung 2023 - SSP2023, 163–174. https://doi.org/10.18419/OPUS-13131
    12. Bosch, M. J., Nitzlader, M., Voigt, M. P., Bachmann, M., Roth, D., Binz, H., Blandini, L., & Kreimeyer, M. (2023). Interdisziplinäre Entwicklung einer adaptiven Geschossdecke als leichtes Tragwerkselement im Bauwesen. Stuttgarter Symposium für Produktentwicklung SSP 2023: Tagungsband zur Konferenz, Stuttgart, 25. Mai 2023, 211–222. https://doi.org/10.18419/OPUS-13131
    13. Bosch, M. J., Nitzlader, M., Bachmann, M., Binz, H., Blandini, L., & Kreimeyer, M. (2023). EXPERIMENTAL TESTING OF ACTUATOR CHAMBERS OF INTEGRATED FLUIDIC ACTUATORS FOR ADAPTIVE SLABS. In J. F. S. Gomes (Ed.), Proceedings ICEM20 20th International Conference on Experimental Mechanics (pp. 499–510). INEGI-FEUP. https://paginas.fe.up.pt/~icem20/proceedings_icem20/data/papers/19905.pdf
    14. Stölzle, M., Roth, D., & Kreimeyer, M. (2023). Classification of Methodologies for Design for Circular Economy based on a literature study. Proceedings of the Design Society, 3, 927–936. https://doi.org/10.1017/pds.2023.93
    15. Stölzle, M., Roth, D., & Kreimeyer, M. (2023). Auswirkungen der Umsetzung von Design for Circular Economy Merkmalen auf den Produktentwicklungsprozess. Proceedings of the 34th Symposium Design for X (DFX2023), 135–142. https://doi.org/10.35199/dfx2023.14
    16. Paliyenko, Y., Salinas, R., Roth, D., & Kreimeyer, M. (2023). Vorgehen zur Modellierung des Wertschöpfungsnetzwerks  smarter Produkt-Service-Systeme. In T. D. Society (Ed.), Proceedings of the 34th Symposium Design for X (DFX2023). https://doi.org/10.35199/dfx2023
    17. Paliyenko, Y., Heinz, D., Schiller, C., Tüzün, G.-J., Roth, D., & Kreimeyer, M. (2023). REQUIREMENTS FOR A SMART PRODUCT-SERVICE SYSTEM DEVELOPMENT FRAMEWORK. In C. U. Press (Ed.), Proceeding of the Design Society. International Conference on Engineering Design - ICED2023. https://doi.org/10.1017/pds.2023.309
    18. Voigt, M., Roth, D., & Kreimeyer, M. (2023). Decision Support for Defining Adaptive Façade Design Goals in the Early Design Phase. Energies, 16(3411), Article 3411. https://doi.org/10.3390/en16083411
    19. Voigt, M., Chwalek, K., Roth, D., Kreimeyer, M., & Blandini, L. (2023). The Integrated Design Process of Adaptive Facades - A Comprehensive Perspective. Journal of Building Engineering, 67. https://doi.org/10.1016/j.jobe.2023.106043
    20. Kreimeyer, M., Maier, T., Roth, D., Langner, C., & Fuchs, L. (2023). Automatisierte ÖPNV-Systeme: Inklusion im autonomen Stadtbus. Magazin des Stuttgarter Maschinenbaus, 12/23(5), Article 5. https://www.verbund.uni-stuttgart.de/maschinenbau/dokumente/231115_SMB_Magazin5_Web.pdf
    21. Burghardt, T., Honold, C., Böhm, M., Heidingsfeld, J. L., Bachmann, M., Roth, D., Binz, H., Sawodny, O., & Kreimeyer, M. (2023). Entwicklung von Aktoren für ein adaptives Hochhaustragwerk/Development of Actuators for an Adaptive High-rise Building Structure. Konstruktion, 75(01–02), Article 01–02. https://doi.org/10.37544/0720-5953-2023-01-02-68
    22. Borschewski, D., Voigt, M., Albrecht, S., Roth, D., Kreimeyer, M., & Leistner, P. (2023). Why are adaptive facades not widely used in practice? Identifying ecological and economical benefits with life cycle assessment. Building and Environment, 232(110069), Article 110069. https://doi.org/10.1016/j.buildenv.2023.110069
    23. Borschewski, D., Albrecht, S., Bischoff, M., Blandini, L., Bosch, M. J., Dazer, M., Efinger, D., Eisenbarth, C., Haase, W., Kreimeyer, M., Leistner, P., Nitzlader, M., Roth, D., Sawodny, O., van den Adel, F., Voigt, M. P., & Weber, S. (2023). Ökobilanzierung adaptiver Hüllen und Strukturen. Bauphysik, 45(2), Article 2. https://doi.org/10.1002/bapi.202300102

  4. 2022

    1. Paliyenko, Y., Roth, D., & Kreimeyer, M. (2022). Investigating the Evolution of Product Development  towards Smart Product-Service System Design (T. D. Society, Ed.).
    2. Voigt, M. P., Roth, D., & Kreimeyer, M. (2022). Main Characteristics of Adaptive Façades. Proceedings of the Design Society: International Design Conference - Design 2022. https://doi.org/10.1017/pds.2022.257
    3. Tüzün, G.-J., Roth, D., & Kreimeyer, M. (2022). Additive Manufacturing Conformity – A Practical View. Proceedings of the Design Society, 2, 1481–1490. https://doi.org/10.1017/pds.2022.150
    4. Nitzlader, M., Bosch, M. J., Binz, H., Kreimeyer, M., & Blandini, L. (2022, June). Actuation of concrete slabs under bending with integrated fluidic actuators. 15th World Congress on Computational Mechanics (WCCM-XV) and 8th Asian Pacific Congress on Computational Mechanics (APCOM-VIII). 15th World Congress on Computational Mechanics (WCCM-XV) and 8th Asian Pacific Congress on Computational Mechanics (APCOM-VIII), Yokohama. https://doi.org/10.23967/wccm-apcom.2022.014
    5. Hommel, P., Roth, D., Binz, H., & Kreimeyer, M. (n.d.). Toward a Method for Evaluating the Applicability of Aluminum Foam Sandwich. Proceedings of the Design Society, 2, 455–464. https://doi.org/10.1017/pds.2022.47
    6. Falter, J., Dausch, V., Saeed, M. S., & Kreimeyer, M. (2022). Einsatz von KI-Methoden bei der Optimierung von Welle-Nabe-Verbindungen Aufbau, Funktion und Trainieren von KI-Methoden und künstlichen neuronalen Netzen. VDI-Bericht: Welle-Nabe-Verbindungen 2022, 2408, 115–127. https://doi.org/10.51202/9783181024089-115
    7. Falter, J., Dausch, V., Saeed, M. S., Binz, H., & Kreimeyer, M. (2022). Einsatz von KI-Methoden bei der Optimierung von Welle-Nabe-Verbindungen: Aufbau, Funktion und Trainieren von KI-Methoden und künstlichen neuronalen Netzen. 9. VDI-Fachtagung Welle-Nabe-Verbindungen 2022: Dimensionierung - Fertigung - Anwendungen und Trends, 2408, Article 2408. https://doi.org/10.51202/9783181024089-115
    8. Falter, J., Binz, H., & Kreimeyer, M. (2022). Hohe Übermaße bei Pressverbindungen: Potenziale der elastisch-plastischen Auslegung erkennen und nutzen. 9. VDI-Fachtagung Welle-Nabe-Verbindungen 2022: Dimensionierung - Fertigung - Anwendungen und Trends, 2408, Article 2408.
    9. Dausch, V., Kröger, J., & Kreimeyer, M. (2022). An AI-Based Approach to Optimize Stress in Shrink Fits. Proceedings of the Design Society, 2, 1549–1558. https://doi.org/10.1017/pds.2022.157
    10. Bosch, M. J., Nitzlader, M., Burghardt, T., Bachmann, M., Binz, H., Blandini, L., & Kreimeyer, M. (2022, June). Effective range of integrated fluidic actuators in structural elements. 15th World Congress on Computational Mechanics (WCCM-XV) and 8th Asian Pacific Congress on Computational Mechanics (APCOM-VIII). 15th World Congress on Computational Mechanics (WCCM-XV) and 8th Asian Pacific Congress on Computational Mechanics (APCOM-VIII), Yokohama. https://doi.org/10.23967/wccm-apcom.2022.046
    11. Bosch, M. J., Nitzlader, M., Burghardt, T., Bachmann, M., Binz, H., Blandini, L., & Kreimeyer, M. (2022). Design of integrated fluidic actuators for multi-axial loaded structural elements. 8th European Congress on Computational Methods in Applied Sciences and Engineering. 8th European Congress on Computational Methods in Applied Sciences and Engineering, Oslo, Norway. https://doi.org/10.23967/eccomas.2022.081
    12. Bosch, M. J., Nitzlader, M., Burghardt, T., Bachmann, M., Binz, H., Blandini, L., & Kreimeyer, M. (2022). Design of integrated fluidic actuators for muti-axial loaded structural elements. 8th European Congress on Computational Methods in Applied Sciences and Engineering. 8th European Congress on Computational Methods in Applied Sciences and Engineering, Oslo, Norway. https://doi.org/10.23967/eccomas.2022.081
    13. Bosch, M. J., Falter, J., Binz, H., & Kreimeyer, M. (2022). Hohe Übermaße bei Pressverbindungen: Grundlagen zur Steigerung der Übertragungsfähigkeit von Pressverbindungen in elektrischen Maschinen. 9. VDI-Fachtagung Welle-Nabe-Verbindungen, 2408, 245–259. https://www.vdi-nachrichten.com/shop/welle-nabe-verbindungen-2022/
    14. Bosch, M., Falter, J., Binz, H., & Kreimeyer, M. (2022). Hohe Übermaße bei Pressverbindungen: Grundlagen zur Steigerung der Übertragungsfähigkeit in elektrischen Maschinen. 9. VDI-Fachtagung Welle-Nabe-Verbindungen 2022: Dimensionierung - Fertigung - Anwendungen und Trends, 2408, Article 2408.
    15. Paliyenko, Y., Tüzün, G.-J., Roth, D., & Kreimeyer, M. (2022). Inquiry and Analysis of Challenges in the Development of Smart  Product-Service Systems. In C. U. Press (Ed.), Proceeding of the Design Society. International Design Conference - DESIGN2022. https://doi.org/10.1017/pds.2022.196
    16. Nitzlader, M., Steffen, S., Bosch, M. J., Binz, H., Kreimeyer, M., & Blandini, L. (2022). Designing Actuation Concepts for Adaptive Slabs with Integrated Fluidic Actuators Using Influence Matrices. CivilEng, 3(3), Article 3. https://doi.org/10.3390/civileng3030047
    17. Kreimeyer, M., Bosch, M., & Sawodny, O. (2022). Aktorik im Systemverbund. Magazin des Stuttgarter Maschinenbaus, 07/22, Article 07/22. https://www.verbund.uni-stuttgart.de/maschinenbau/dokumente/220622_SMB_Magazin3_Web.pdf
    18. Falter, J., Binz, H., & Kreimeyer, M. (2022). Investigations on design limits and improved material utilization of press-fit connections using elastic-plastic design. Applications in Engineering Science, 13, 14. https://doi.org/10.1016/j.apples.2022.100124
    19. Borschewski, D., Albrecht, S., Bischoff, M., Blandini, L., Bosch, M. J., Dazer, M., Efinger, D., Eisenbarth, C., Haase, W., Kreimeyer, M., Leistner, P., Nitzlader, M., Roth, D., Sawodny, O., van den Adel, F., Voigt, M., & Weber, S. (2022). Ökobilanzierung adaptiver Hüllen und Strukturen. Bautechnik. https://doi.org/10.1002/bate.202200067

  5. 2021

    1. Binz, H., Kreimeyer, M., Roth, D., Voigt, M., Bosch, M., & Burghardt, T. (2021). Weltweit erstes adaptives Hochhaus mit adaptivem Tragwerk und adaptiven Fassaden. Newsletter Wissenschaftliche Gesellschaft für Produktentwicklung WiGeP, 5–7. http://www.wigep.de/fileadmin/download/wigep/FINAL_WiGeP_News_2021-2.pdf

  6. 2020

    1. Vogel, S., Kreimeyer, M., Richter, R., & Spinler, S. (2020). Making customer integration in company processes persistent: Comparison of literature and industrial perspective. NordDesign. https://doi.org/10.35199/NORDDESIGN2020.59
    2. Kreimeyer, M., Seidenschwarz, W., & Rehfeld, M. (2020). Produktplanung (B. Bender & K. Gericke, Eds.; 9th ed.). Springer.

  7. 2018

    1. Santana, A., Simon, D., Kreimeyer, M., Fischbach, K., & de Moura, H. (2018). Deriving Viewpoints for Enterprise Architecture Analysis. 24th Americas Conference on Information Systems.
    2. Braun, F., Kreimeyer, M., & Paetzold, K. (2018). Procedural model to ensure consistency and validity of complex, variant-oriented product portfolios. NordDesign.

  8. 2017

    1. Teleki, A., Fritz, M., & Kreimeyer, M. (2017). Use Cases for automated driving commercial vehicles. 3rd International ATZ Conference Automated Driving.
    2. Stocker, J., Schmidt, M., Thoma, C., Kreimeyer, M., & Lienkamp, M. (2017). Process model for change management in the system of chassis-mounted parts of commercial vehicles. 21st International Conference on Engineering Design (ICED), 139–148.
    3. Schmidt, M., Gehring, B., Gerber, J.-S., Stocker, J., Kreimeyer, M., & Lienkamp, M. (2017). Graph-based Similarity Analysis of BOM Data to Identify Unnecessary Inner Product Variance. 21st International Conference on Engineering Design (ICED), 489–498.
    4. Rehfeld, M., Kreimeyer, M., & Förg, A. (2017). Die Bewertung von Marktanforderungen und interner Varianz entlang eines durchgängigen Anforderungsmanagement-Prozesses. Berliner Requirements Engineering Symposium.
    5. Rehfeld, M., & Kreimeyer, M. (2017). Ein Rückblick auf die Erfahrungen aus dem Rollout von PLM-basiertem Anforderungsmanagement mit Fokus auf die Variantenplanung. Berliner Requirements Engineering Symposium.
    6. Fritz, M., Schneider, T., Herberg, A., & Kreimeyer, M. (2017). Marktorientierte Variantenplanung als Grundlage der Produktentwicklung. Stuttgarter Symposium für Produktentwicklung (SSP).
    7. Braun, F., Kreimeyer, M., & Paetzold, K. (2017). Herausforderungen in der Validierung der Variantenbeschreibung komplexer Produkte. DFX Symposium.

  9. 2016

    1. Stocker, J., Schmidt, M., Kreimeyer, M., & Lienkamp, M. (2016). Development of market-oriented architectural standards by means of standardized vehicle layouts. NordDesign.
    2. Santana, A., Kreimeyer, M., Clo, P., Fischbach, K., & de Moura, H. (2016). An Empirical Investigation of Enterprise Architecture Analysis Based on Network Measures and Expert Knowledge: A Case from the Automotive Industry. 18th International Dependency and Structural Modeling Conference (DSM), 46–56. https://doi.org/10.19255/JMPM-DSM2016
    3. Kreimeyer, M., & Sunder-Plassmann, C. (2016). Durchgängige Produktarchitekturentwicklung – von der Anforderung zum Bauteil in einem System. R&D Efficiency Day.
    4. Kreimeyer, M., & Meissner, R. (2016). Experiences from Integrating an Engine Portfolio Structure into a Total Vehicle Product Structure. Prostep Ivip Symposium.
    5. Kreimeyer, M., & Kopal, B. (2016). Variant Management and Rule Validation of BOM, Positioning and PLM. PI Kongress.
    6. Kreimeyer, M., Baumberger, C., Deubzer, F., & Ziethen, D. (2016). An Integrated Product Information Model for Variant Design in Commercial Vehicle Development. Proceedings of 14th International Design Conference.
    7. Kreimeyer, M. (2016). A Digital Transformation Journey. LiveWorx.
    8. Kreimeyer, M. (2016). Die digitale Prozesskette ganzheitlich mit Architekturmodellen im Unternehmen durchgängig umgesetzt. PTC Executive Exchange.
    9. Kreimeyer, M. (2016). Systematische Baukastenentwicklung in der Nutzfahrzeugindustrie. DFX Symposium.
    10. Karrer-Müller, E., Fuss, T., Schiffer, M., Kreimeyer, M., & Schuh, G. (2016). Towards Implementing Systems Engineering as Part of Commercial Vehicle Design. Proceedings of 14th International Design Conference.
    11. Kreimeyer, M. (2016). Implementing Product Architecture in Industry: Impact of Engineering Design Research: Vol. Impact of Design Research on Practice (A. Chakrabarti & U. Lindemann, Eds.; pp. 383–398). Springer.
    12. Förg, A., Karrer-Müller, E., & Kreimeyer, M. (2016). Produktarchitektur (U. Lindemann, Ed.). Hanser.
    13. Kasparek, D., Schenk, D., Kreimeyer, M., Lindemann, U., & Maurer, M. (2016). Structure-based System Dynamics Analysis of Engineering Design Processes. Systems Engineering, 19(3), Article 3.

  10. 2015

    1. Schumacher, M., Märkl, S., Gilbert, M., & Kreimeyer, M. (2015). Variantenplanung in der Produktarchitektur: Erfahrungen und Best Practices aus der Nutzfahrzeug-Entwicklung. Tag des Systems Engineering.
    2. Kreimeyer, M. (2015). Systematische Produktarchitekturgestaltung bei Nutzfahrzeugen. 11. Aachener Management Tage.
    3. Kopal, B., Kreimeyer, M., & Zagel, M. (2015). Management eines Produktfamilienübergreifenden Regelwerks. SmartVariantCon.
    4. Karrer-Müller, E., Schiffer, M., Kreimeyer, M., & Schuh, G. (2015). Prozessmodell für die frühe Phase der Entwicklung mechatronischer Systeme am Beispiel der Nutzfahrzeugbranche. DGLR-Bericht - Kooperation und kooperative Systeme in der Fahrzeug- und Prozessführung, 31–44.
    5. Kreimeyer, M., Deubzer, F., Baumberger, C., & Heintze, W. (2015). Ein auf Variantenmanagement optimiertes Produktinformationsmodell für die Nutzfahrzeugentwicklung. ProduktDatenJournal, 2, 18–21.

  11. 2014

    1. Kreimeyer, M., Förg, A., & Lienkamp, M. (2014). Fostering modular kits in an industrial brownfield environment. International Symposium Series on Tools and Methods of Competitive Engineering (TMCE).
    2. Kreimeyer, M. (2014). Implementing Architecture in Engineering Design. 13th International Design Conference.
    3. Förg, A., Wolter, M., Kreimeyer, M., & Lienkamp, M. (2014). Virtual Vehicle Design based on Key Performance Indicators Assessing the Vehicle Portfolio. SAE 2014 Commercial Vehicle Engineering Congress.
    4. Förg, A., Stocker, J., Kreimeyer, M., & Lienkamp, M. (2014). Enabling modularisation potentials by standardized vehicle layouts. NordDesign, 754–764.
    5. Förg, A., Kreimeyer, M., & Lienkamp, M. (2014). Virtueller Fahrzeugentwurf und Architekturplanung in der frühen Konzeptphase. Grazer Symposium Virtuelles Fahrzeug.
    6. Förg, A., Kreimeyer, M., & Lienkamp, M. (2014). Architecting new Vehicle Concepts: Virtual Design and Performance based Assessment. 13th International Heavy Vehicle Transport Technology Symposium.
    7. Becker, J., Gilbert, M., Förg, A., Kreimeyer, M., Rhodes, D., & Lienkamp, M. (2014). Dependency analysis as a heat map for architecture standardization. 5th Complex Systems Design & Management Conference.

  12. 2013

    1. Kreimeyer, M., Förg, A., & Lienkamp, M. (2013). Mehrstufige modulorientierte Baukastenentwicklung für Nutzfahrzeuge. VDI-Berichte Nr. 2187, 99–112.
    2. Karrer-Müller, E., Deubzer, F., & Kreimeyer, M. (2013). Lastenheftabarbeitung in den frühen Phasen der Entwicklung. VDI-Berichte Nr. 2186, 285–294.
    3. Greisel, M., Kissel, M., Spinola, B., & Kreimeyer, M. (2013). Design for adaptability in multi-variant product families. 19th International Conference on Engineering Design (ICED), 179–188.
    4. Braun, B., Kissel, M., Förg, A., & Kreimeyer, M. (2013). Analyse von Baukastensystematiken an einem Beispiel der Nutzfahrzeugindustrie. 24th DfX Symposium, 25–37.

  13. 2012

    1. Watty, R., & Kreimeyer, M. (2012). Assessment of Engineering Theses. 14th International Conference on Engineering and Product Design Education (E&PDE), 328–333.
    2. Plaikner, S., Kissel, M., Kreimeyer, M., & Lindemann, U. (2012, August). An Architecture Framework for Multi-Product Portfolio Management in the Commercial Vehicle Industry. NordDesign.
    3. Kreimeyer, M., Metzger, U., & Karrer-Müller, E. (2012). Ganzheitliche Bewertung unterschiedlicher Lösungskonzepte - Konzeptbewertung in den frühen Phasen der Entwicklung. Commercial Vehicle Symposium.
    4. Kreimeyer, M. (2012). A Product Model to Support PLM-Based Variant Planning and Management. 12th International Design Conference DESIGN.
    5. Kissel, M., Bradford, N., Kreimeyer, M., & Lindemann, U. (2012). Product Structure Management as the Backbone of Engineering Design: Exploration of a Reference Model. 12th International Design Conference DESIGN, 1709–1718.
    6. Kreimeyer, M., & Herfeld, U. (2012). Audi AG Team Composition for Collaboration: Vol. Design Structure Matrix Methods and Applications (S. Eppinger & T. Browning, Eds.; pp. 260–265). MIT Press.
    7. Kreimeyer, M. (2012). Audi AG Body-In-White Development: Vol. Design Structure Matrix Methods and Applications (S. Eppinger & T. Browning, Eds.; pp. 300–307). MIT Press.
    8. Deubzer, F., Maurer, M., & Kreimeyer, M. (2012). Design Matrix: Vol. Handbuch Konstruktion (F. Rieg & R. Steinhilper, Eds.; pp. 681–701). Hanser.
    9. Wynn, D., Kreimeyer, M., Lindemann, U., & Clarkson, J. (2012). Dependency modelling in complex system design. Journal of Engineering Design, 23(10–11), Article 10–11.

  14. 2011

    1. Watty, R., & Kreimeyer, M. (2011). A Proposal for an Assessment Form for Engineering Design Theses. 18th International Conference on Engineering Design (ICED), 184–193.
    2. Maier, A., Doenmez, D., Hepperle, C., Kreimeyer, M., Lindemann, U., & Clarkson, J. (2011). Improving Communication in Design: Recommendations from the Literature. 18th International Conference on Engineering Design (ICED), 1–11.
    3. Kreimeyer, M., Kindsmiller, H., Landsherr, T., & Heintze, W. (2011). Systematische Planung der Produktarchitektur von Nutzfahrzeugen in den frühen Phasen der Entwicklung. VDI Nutzfahrzeuge.
    4. Kreimeyer, M., & Lindemann, U. (2011). Complexity Metrics in Engineering Design (p. 404). Springer.
    5. Kreimeyer, M. (2011). Aggregate Views to Manage Networks Consisting of Several Domains. International Journal of Product Development, 14(1–4), Article 1–4.

  15. 2010

    1. Watty, R., Kreimeyer, M., & Hoffmann-Berling, P. (2010). Assessment of Theses in Engineering Education. 11th International Design Conference DESIGN, 601–608.
    2. Kreimeyer, M., Wynn, D., Clarkson, J., & Lindemann, U. (2010). Profiling PD Processes by Combining Structural Analysis and Simulation. 11th International Design Conference DESIGN, 1131–1142.
    3. Kreimeyer, M., & Lindemann, U. (2010). A GQM Framework to Guide Process Improvement using Structural Analysis. 11th International Design Conference DESIGN, 1119–1130.
    4. Kreimeyer, M., Bradford, N., & Lindemann, U. (2010). Process Analysis using Structural Metrics: A Comprehensive Case Study. 11th International Design Conference DESIGN, 295–306.
    5. Kreimeyer, M., Bradford, N., Langer, S., Biedermann, W., & Lindemann, U. (2010). Systematic Aggregation of Multiple Views onto a Complex System as Individual Design Structure Matrices. International Symposium Series on Tools and Methods of Competitive Engineering (TMCE).
    6. Wynn, D., Kreimeyer, M., Eben, K., Maurer, M., Lindemann, U., & Clarkson, J. (2010). Managing Complexity by Modelling Dependencies: Vol. Managing Complexity by Modelling Dependencies: Proceedings of the 12th International DSM Conference (p. 464). Hanser.
    7. Kreimeyer, M. (2010). A Structural Measurment System for Engineering Design Processes: Vol. A Structural Measurement System for Engineering Design Processes (p. 420). Dr.-Hut.

  16. 2009

    1. Watty, R., & Kreimeyer, M. (2009). Assessment of Theses – A Comparison of Current Approaches Practiced in Engineering Education. 17th International Conference on Engineering and Product Design Education, 164–169.
    2. Kreimeyer, M., Braun, S., Gürtler, M., & Lindemann, U. (2009). Extending Multiple Domain Matrices to allow for the Modeling of Boolean Operators in Process Models. 17th International Conference on Engineering and Product Design Education, 1–12.
    3. Kortler, S., Kreimeyer, M., & Lindemann, U. (2009). A Planarity-based Complexity Metric. 17th International Conference on Engineering and Product Design Education, 31–42.
    4. Biedermann, W., Kreimeyer, M., & Lindemann, U. (2009). Measurement System to Improve Data Acquisition Workshops. 11th International DSM Conference.
    5. Langer, S., Kreimeyer, M., & Müller, P. (2009). Entwicklungsprozesse hybrider Leistungsbündel – Evaluierung von Modellierungsmethoden unter  Berücksichtigung zyklischer Einflussfaktoren: Vol. Dienstleistungsmodellierung – Methoden, Werkzeuge und Branchenlösungen (O. Thomas & M. Nüttgens, Eds.; pp. 71–87). Physica.
    6. Maier, A., Kreimeyer, M., Lindemann, U., & Clarkson, J. (2009). Reflecting communication: A Key Factor for successful Collaboration between Embodiment Design and Simulation. Journal of Engineering Design, 20(3), Article 3.

  17. 2008

    1. König, C., Kreimeyer, M., & Braun, T. (2008). Multiple-domain Matrices as a Framework for Systematic Process Analysis. 10th International DSM Conference, 131–244.
    2. Kreimeyer, M., König, C., & Braun, T. (2008). Structural Metrics to Assess Processes. 10th International DSM Conference, 245–258.
    3. Kreimeyer, M., Gürtler, M., & Lindemann, U. (2008). Structural Metrics for Decision Points within Multiple-domain Matrices representing Design Processes. IEEE International Conference on Industrial Engineering and Engineering Management, 435–439.
    4. Kreimeyer, M., Deubzer, F., Herfeld, U., & Lindemann, U. (2008). Strategies towards Maturity of product information Objects to manage concurrent Engineering Processes. International Symposium Series on Tools and Methods of Competitive Engineering (TMCE), 925–940.
    5. Kreimeyer, M., Daniilidis, C., & Lindemann, U. (2008). A Framework to classify process improvement projects. 10th International Design Conference.
    6. Kreimeyer, M., Daniilidis, C., & Lindemann, U. (2008). A Procedural Model for Process Improvement Projects. EdiProd Conference, 275–282.
    7. Kreimeyer, M., Braun, S., Gürtler, M., & Lindemann, U. (2008). Relating two Domains via a Third - an Approach to Overcome Ambiguous Attributions using Multiple-domain Matrices. ASME 2008 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE.
    8. Kreimeyer, M., Lindemann, U., & Danilovic, M. (2008). Follow the Flow of Information: Proceedings of the 10th International DSM Conference: Vol. Proceedings of the 10th International DSM Conference (p. 406). Hanser.
    9. Maier, A., Kreimeyer, M., Hepperle, C., Eckert, C., Lindemann, U., & Clarkson, J. (2008). Exploration of correlations between factors influencing communication in complex product development. Concurrent Engineering, 16(37), Article 37.

  18. 2007

    1. Ponn, J., Hepperle, C., Kreimeyer, M., & Lindemann, U. (2007). Methodical Evaluation of single and group Projects, International Conference on Engineering and Product Design Education. International Conference on Engineering and Product Design Education (E&PDE).
    2. Maier, A., Hepperle, C., Kreimeyer, M., Eckert, C., Lindemann, U., & Clarkson, J. (2007, August). Associations between Factors influencing Engineering Design Communication. 16th International Conference on Engineering Design (ICED).
    3. Kreimeyer, M., Eichinger, M., & Lindemann, U. (2007, August). Aligning multiple Domains of Design Processes. 16th International Conference on Engineering Design (ICED).
    4. Kreimeyer, M., Eichinger, M., & Lindemann, U. (2007). Assessment of Process Networks using Graph and Network Theory Based Key Figures. FUBUTEC, 13–19.
    5. Kreimeyer, M., Deubzer, F., Herfeld, U., & Lindemann, U. (2007). A Survey on efficient Collaboration of Design and Simulation in Product Development. 25th CADFEM Users’ Meeting.
    6. Kreimeyer, M., Deubzer, F., Danilovic, M., & Fuchs, S. (2007, August). Team Composition to enhance Collaboration between Embodiment Design and Simulation Departments. 16th International Conference on Engineering Design (ICED).
    7. Hepperle, C., Maier, A., Kreimeyer, M., Lindemann, U., & Clarkson, J. (2007). Analyzing Communication Dependencies in Product Development using the Design Structure Matrix. 9th International DSM Conference.
    8. Grieb, J., Kreimeyer, M., & Lindemann, U. (2007). Methodical Support of Multidisciplinary Globally Distributed Design Projects. ProSTEP IViP Science Days, 154–161.
    9. Frank, T., Herfeld, U., Kreimeyer, M., & Lindemann, U. (2007). Parametrische Optimierung im CAD-CAE-Prozess der Karosserieentwicklung. 25th CADFEM Users’ Meeting.
    10. Deubzer, F., Kreimeyer, M., Herfeld, U., & Lindemann, U. (2007, August). A strategy for efficient collaboration in virtual product development environments. 16th International Conference on Engineering Design (ICED).
    11. Lindemann, U., Danilovic, M., Deubzer, F., Maurer, M., & Kreimeyer, M. (2007). Capitalize on Complexity: Proceedings of the 9th International DSM Conference: Vol. Proceedings of the 9th International DSM Conference (p. 430). Shaker.
    12. Keijzer, W., Kreimeyer, M., Schack, R., Lindemann, U., & Zäh, M. (2007). Vernetzungsstrukturen in der Digitalen Fabrik. Dr.-Hut.
    13. Kreimeyer, M., Keijzer, W., & Lindemann, U. (2007). Methodisches Handeln bei Krisen in der Produktentwicklung. Konstruktion, 9, 104–106.
    14. Kreimeyer, M., Deubzer, F., Herfeld, U., & Lindemann, U. (2007). Effiziente Zusammenarbeit von Konstruktion und Berechnung. CadPlus Business Engineering, 3, 38–40.

  19. 2006

    1. Maier, A., Kreimeyer, M., Deubzer, F., Herfeld, U., Lindemann, U., & Clarkson, J. (2006). Reflecting Communication: A key Factor for successful Collaboration between Embodiment Design and Simulation. 9th International Design Conference, 1943–1490.
    2. Kreimeyer, M., Neumüller, K., & Lindemann, U. (2006). A Management Model for the Design Process in Vehicle Safety Development. 9th International Design Conference, 1525–1532.
    3. Kreimeyer, M., Herfeld, U., Deubzer, F., Dequidt, C., & Lindemann, U. (2006). Function-driven Product Design in virtual Teams through methodical Structuring of Requirements and Components. 8th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA).
    4. Kreimeyer, M., Eichinger, M., Maurer, M., & Deubzer, F. (2006). Misalignment between implicit and real Process Structures. 8th International Design Structure Matrix Conference.
    5. Kreimeyer, M., Braun, S., Baumberger, C., Meiwald, T., Petrovic, K., Max, B., & Stüber, N. (2006). Product Development Seminars – Key Factors for successful Product Development in Student Teams. 6th Engineering and Product Design Education Conference (E&PDE), 335–340.
    6. Keijzer, W., Kreimeyer, M., Schack, R., Lindemann, U., & Zäh, M. (2006). Isolierung versus Vernetzung – wie arbeitet die Branche zusammen? Kongress Digitale Fabrik.
    7. Herfeld, U., Kreimeyer, M., Deubzer, F., Frank, T., Lindemann, U., & Knaust, U. (2006). Verknüpfung von Komponenten und Funktionen zur Integration von Konstruktion und Simulation in der Karosserieentwicklung. Berechnung und Simulation im Fahrzeugbau, 259–276.
    8. Deubzer, F., Kreimeyer, M., Petermann, M., & Lindemann, U. (2006). Analyse und Modellierung komplexer Systeme und Prozesse unter kognitiven Randbedingungen. Cognitive Systems Engineering in der Fahrzeug- und Prozessführung.
    9. Deubzer, F., Kreimeyer, M., & Lindemann, U. (2006). Exploring Strategies in Change Management - Current Status and Activity Benchmark. 9th International Design Conference, 815–822.
    10. Deubzer, F., Kreimeyer, M., & Danilovic, M. (2006). Design of Integrated Teams in Automotive Industry – a DMM Application. 8th International Design Structure Matrix Conference.
    11. Kreimeyer, M., Heymann, M., Lauer, W., & Lindemann, U. (2006). Die Konstruktionsmethodik im Wandel der Zeit –  ein Überblick zum 100sten Geburtstag von Prof. Wolf Rodenacker. Konstruktion, 10, 72–74.

  20. 2005

    1. Deubzer, F., Herfeld, U., Kreimeyer, M., & Lindemann, U. (2005). A Structured Holistic Approach for the Integration of CAD and CAE Environments. ProSTEP IViP Science Days, 244–255.
    2. Lindemann, U., Maurer, M., & Kreimeyer, M. (2005). Intelligent strategies for structuring products (J. Clarkson & M. Huhtala, Eds.; pp. 106–115). Engineering Design Center. https://www-edc.eng.cam.ac.uk/downloads/symposium.pdf
To the top of the page